Glove Corp "Wildfire" Green" Glove

THE GLOVE CORPORATION

WILDFIRE "Green"

SPECIFICATION FOR KNIT WRIST STYLE

THE GLOVE CORPORATION proudly manufactures in the U.S.A. and is

ISO 9001:2000 COMPLIANT

DESCRIPTION: The glove is specifically designed and constructed for wildiand firefighting activities. It is manufactured of material designed to withst  and the effects of flame, heat, sharp objects and other hazards that are encountered during widiland firefighting operations.

The gloves meets or exceed the National Fire Protection Association, NFPA-1 977 standard “Protective Clothing and Equipment for Wildiand Fire Fighting” 1998 Edition.

Documentation by Underwriters Laboratories, an independent certified testing laboratory, can be submitted to verify our gloves meet or exceed the NEPA 1977(1998 Edition). Third party certification is required to verify that gloves pass all the following parameters:

• Glove Heat Resistance
• Glove Flame Resistance
• Conductive Heat Resistance
• Thermal Protective Performance (TPP)
• Cut Resistance
• Puncture Resistance
• Dexterity
• Grip Test
• Label Durability and Legibility Test One
• Design Review
• Label Review
• User Information Review

CONSTRUCTION: Our gloves meet or exceed all the required standards mentioned above.

DESIGN: Thermal split leather, gunn cut, wing thumb, unlined, five-fingered glove. The back of glove has an elastic snugger band in the wrist area for secure fit. Thermal split leather welting is sewn on palm side of the two middle fingers for additional support. Athermal split leather patch shall be sewn in the thumb crotch area to alleviate stress of high wear. A continuous index finger construction is be used to eliminate exposed seams or stitching. A leather hang-up loop is provided on inside of glove to facilitate drying and storage.

MATERIALS: Outer Leather shell Thermal split cow leather of not less than 3 oz or more than 3 % oz. Each glove is uniform in color.Welting is not less than 3 oz or more than 3

LINER: The glove is unlined.

CUFF: The wristlet style is made of 100% Kevlar material four ply, a minimum of 4” long. A leather pull patch to cover the inner wrist area is sewn to the wristlet to ensure ease of donning and to provide extra wrist protection.

STITCHING: All outer stitching is of heat resistant Kevlar 30/3 thread with a minimum of 8 stitches per inch.

ORIGIN: Made in U.S.A.

1/2 oz. Leather is tanned to resist cracking, peeling, and stiffening and processed to reduce slipperiness when wet.